Garmin GPSMAP 67 - GPS Satellite and Data Transfer Settings

GPS Satellite Settings
Press MENU twice to open the main menu. Select Satellite. Press MENU.
Use With GPS On: Allows you to turn the GPS on.
Track Up: Indicates whether satellites are shown with their rings oriented with north toward the top of the
screen, or oriented with your current track toward the top of the screen.
Single Color: Allows you to select whether the satellite page is displayed in multicolor or single color format.
Set Location On Map: Allows you to mark your current location on the map. You can use this location to create
routes or search for saved locations.
AutoLocate Position: Calculates your GPS position using the Garmin AutoLocate
®
feature.
Satellite Setup: Sets the satellite system options (Satellite Settings, page36).
Sending and Receiving Data Wirelessly
Before you can share data wirelessly, you must be within 3m (10ft.) of a compatible Garmin device.
Your navigator can send and receive data wirelessly when connected with a compatible Garmin device using
ANT+ technology. You can share waypoints, geocaches, routes, tracks, and more.
1 Press MENU twice to open the main menu.
2 Select Share Wirelessly.
3 Select an option:
• Select Send, and select a type of data.
• Select Receive to receive data from another device. The other compatible device must be attempting to
send data.
4 Follow the on-screen instructions.
Using the VIRB Remote
Before you can use the VIRB remote function, you must enable the remote setting on your VIRB camera. See the
VIRB Series Owner's Manual for more information.
The VIRB remote function allows you to control your VIRB camera using your navigator.
1 Turn on your VIRB camera.
2 On your GPSMAP 67 navigator, select VIRB Remote.
NOTE: You may need to add this application to the main menu before you can select it (Customizing the Main
Menu, page40).
3 Wait while the navigator connects to your VIRB camera.
4 Select an option:
• To record video, select .
• To take a photograph, select .
34 Main Menu Tools