Garmin GPSMAP 67 - Geocaching and Fitness Settings; Geocaching Configuration Options

Geocaching Settings
Press MENU twice to open the main menu. Select Setup > Geocaching.
Geocaching Live: Allows you to remove live geocache data from your device and remove your device
registration from geocaching.com (Removing Live Geocache Data from the Device, page32, Removing Your
Device Registration From Geocaching.com, page32).
Geocache Style: Sets the device to display the geocache list using names or codes.
chirp™ Setup: Allows you to enable chirp searching and program a chirp accessory (chirp, page31).
Filter Setup: Allows you to create and save custom filters for geocaches (Saving a Custom Geocache Filter,
page30).
Found Geocaches: Allows you to edit the number of geocaches found. This number automatically increases
when you log a find (Logging the Attempt, page31).
Proximity Alarm: Allows you to set an alert to sound when you are within a specified range of a geocache.
Pairing Your Wireless Sensors
Before you can pair, you must put on the heart rate monitor or install the sensor.
Your navigator can be paired with wireless sensors using ANT+ or Bluetooth technology. For example, you can
connect a heart rate monitor with your navigator. For more information about compatibility and purchasing
optional sensors, go to buy.garmin.com.
1 Bring the navigator within 3m (10ft.) of the sensor.
NOTE: Stay 10m (33ft.) away from other sensors while pairing.
2 Press MENU twice to open the main menu.
3 Select Setup > Sensors.
4 Select your sensor type.
5 Select Search For New.
When the sensor is paired with your navigator, the sensor status changes from Searching to Connected.
Fitness Settings
Press MENU twice to open the main menu. Select Setup > Fitness.
Auto Lap: Sets the navigator to automatically mark the lap at a specific distance.
User: Sets your user profile information. The navigator uses this information to calculate accurate training data
in Garmin Connect.
HR Zones: Sets the five heart rate zones and your maximum heart rate for fitness activities.
Marking Laps by Distance
You can use the Auto Lap
®
feature to automatically mark the lap at a specific distance. This feature is helpful for
comparing your performance over different parts of an activity.
1 Press MENU twice to open the main menu.
2 Select Setup > Fitness > Auto Lap.
3 Enter a value, and select Done.
Customizing the Device 39