Garmin GPSMAP 67 - Geocaching Navigation and Logging; Navigating and Finding Geocaches

Navigating to a Geocache
1 Press MENU twice to open the main menu.
2 Select Geocaching.
3 Select a geocache.
4 Select Go.
Using Hints and Clues to find a Geocache
You can use hints or clues, such as a description or coordinates, to help you find a geocache.
1 While navigating to a geocache, select MENU > Geocache.
2 Select an option:
• To view details about the geocache, select Description.
• To view a clue about a geocache location, select Hint.
• To view latitude and longitude for a geocache, select Coordinates.
• To view feedback about the geocache from previous searchers, select Logs.
• To turn on chirp
™
searching, select chirp™.
Logging the Attempt
After you have attempted to find a geocache, you can log your results. You can verify some geocaches at www
.geocaching.com.
1 Press MENU twice to open the main menu.
2 Select Geocaching > Log.
3 Select Found, Did Not Find, Needs Repair, or Unattempted.
4 Select an option:
• To stop logging, select Done.
• To begin navigation to the geocache nearest you, select Find Next Closest.
• To enter a comment about looking for the cache or about the cache itself, select Edit Comment, enter a
comment, and select Done.
If you are signed in to www.geocaching.com, the log uploads to your www.geocaching.com account
automatically.
chirp
A chirp is a small Garmin accessory that is programmed and left in a geocache. You can use your device to find
a chirp in a geocache.
Enabling chirp Searching
1 Press MENU twice to open the main menu.
2 Select Setup > Geocaching > chirp™ Setup.
3 Select chirp™ Searching > On.
Finding a Geocache with a chirp
1 With chirp searching enabled, navigate to a geocache.
When you are within approximately 10m (33ft.) of the geocache that contains a chirp, details about the
chirp appear.
2 Select Show Details.
3 If necessary, select Go to navigate to the next stage of the geocache.
Main Menu Tools 31