Garmin GPSMAP 740 - Bluechart G2 Vision

16 GPSMAP 700 Series Owner’s Manual
Charts and 3D Chart Views
Adjusting the View
• Select to move the view closer to your boat and lower to the water.
• Select to move the view away from the boat.
The scale ( ) is momentarily indicated at the bottom of the screen.
Panning the Perspective 3D, Mariner’s Eye 3D, or Fish Eye 3D Views
You can pan around your present location on the Perspective 3D, Mariner’s Eye 3D, or Fish Eye 3D Views.
: Mariner’s Eye 3D and Fish Eye 3D chart views are available only if you use a BlueChart g2 Vision
SD card (page 16).
1. From the Home screen, select .
2. Select , , or .
3. Touch and drag the screen to the left or right to rotate the 3D view.
4. Select  to stop panning and return the screen to your present location.
Perspective 3D and Mariner’s Eye 3D Chart Appearance
Showing Range Rings
The range rings help you to visualize distances in Perspective 3D or Mariner’s Eye 3D.
: Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select .
2. Select  or .
3. Select  >  >  > .
Selecting a Lane Width
The navigation lane is the magenta line in Perspective 3D or Mariner’s Eye 3D view that indicates the course
to your destination while you are navigating. You can specify the width of the navigation lane.
: Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select .
2. Select  or .
3. Select  >  > .
4. Enter the width.
5. Select .
Showing Other Vessels
See “Conguring the Appearance of Other Vessels” (page 50).
Showing and Conguring Data Overlay
See “Overlay Numbers” (page 48).
Using Waypoints and Tracks
See “Waypoints” (page 26) or “Tracks” (page 30).
BlueChart g2 Vision
An optional, preprogrammed BlueChart g2 Vision data card allows you to get the most out of your chartplotter.
In addition to detailed marine charting, BlueChart g2 Vision has the following features:
•  (page 17)—provides a view from above and behind the boat for a three-dimensional
navigation aid. The BlueChart g2 Vision Mariner’s Eye 3D is more detailed than the pre-loaded data.
•  (page 18)—provides an underwater, three-dimensional view that visually represents the
sea oor according to the information on the chart.
•  (page 19)—shows the chart with enhanced bottom contours and without navigational data.
This chart works well for offshore deep-sea shing.
•  (page 20)—provides high-resolution satellite images for a realistic
view of the land and water on the Navigation chart.