Garmin Instinct 2 Series User Manual

Saving a Quick Timer
You can set up to ten separate quick timers.
1 From any screen, hold SET.
2 Select Timers.
3 Select an option:
• To save your first quick timer, enter the time, press UP, and select Save.
• To save additional quick timers, select Add Timer, and enter the time.
Deleting a Timer
1 From any screen, hold SET.
2 Select Timers.
3 Select a timer.
4 Press UP.
5 Select Delete.
Using the Stopwatch
1 From any screen, hold SET.
2 Select Stopwatch.
3 Press GPS to start the timer.
4 Press SET to restart the lap timer .
The total stopwatch time continues running.
5 Press GPS to stop both timers.
6 Press UP, and select an option.
Syncing the Time with GPS
Each time you turn on the device and acquire satellites, the device automatically detects your time zones and
the current time of day. You can also manually sync the time with GPS when you change time zones, and to
update for daylight saving time.
1 From any screen, hold SET.
2 Select Set Time with GPS.
3 Wait while the device locates satellites (Acquiring Satellite Signals, page98).
4 Clocks

Garmin Instinct 2 Series Specifications

General

Display Type	Monochrome, sunlight-visible, transflective memory-in-pixel (MIP)
Display Resolution	176 x 176 pixels
Lens Material	Chemically strengthened glass
Bezel Material	Fiber-reinforced polymer
Case Material	Fiber-reinforced polymer
Strap Material	Silicone
Water Rating	10 ATM
Memory/History	32 MB
Connectivity	Bluetooth, ANT+, Wi-Fi (varies by model)
Compatibility	iPhone, Android
Smart Notifications	Yes
Music Storage	No
Display Size	0.9” x 0.9” (23 x 23 mm)
QuickFit Watch Band Compatible	Yes
Weight	52 g
Sensors	GPS, GLONASS, Galileo, Barometric altimeter, Compass, Gyroscope, Accelerometer, Thermometer
Garmin Pay	Yes
Color Options	Graphite, Tidal Blue