Garmin Rino 130 User Manual

78
Features
SETUP MENU
The Setup Pages allow you to customize the Rino 130 to your personal preferences. You
can choose time settings, units of measure, display backlighting and contrast settings, heading
measurement, interface options and system operating mode.
By highlighting the icons on the Setup Menu and then pressing the THUMB STICK IN, you
can display the Setup Page for each of the menu items.
To access the Setup Menu
1. Press the PAGE button or the Menu icon to open the Main Menu.
2. In the Main Menu, scroll down and select Setup. There are then several more icons to
choose from in the Setup Menu.
Time Setup Page
You can set the time to match your location or for a projected location anywhere in the
world.
To access the Time Setup page:
1. Press the PAGE button or the Menu icon to open the Main Menu.
2. In the Main Menu, scroll down and select Setup.
3. Select the Time icon to open the Time Setup page.
Time Format - Allows you to choose from 12-hour (like a standard clock with 12-hour AM
and PM cycles) or 24-hour time format ( a 24- hour cycle, also called Military Time).
Time Zone - Can be set to one of the eight US Time Zones, or 24 International Time Zones
(nearest city or geographical region). Select ‘Other’ so you can enter the UTC Time Offset.
Setup Pages
Setup Menu icon in
the Main Menu
Time Setup Page
Time Setup icon

Garmin Rino 130 Specifications

General

Outdoor (hiking, trekking)	Yes
Marine (chartplotters, sounders)	No
Routes quantity	20
Number of waypoints	500
Form factor	Handheld
Grayscale levels	4
Display resolution	160 x 160 pixels
RS-232 ports	1
Internal memory	24 MB
Number of tracklog points	10000
Battery type	AA
Battery life (max)	14 h
Number of batteries supported	3

Weight and Dimensions

Depth	16 mm
Width	58 mm
Height	114 mm
Weight	236 g