Starting a Job 2-17
2
7 Click the Release Icon to start running the job.
Figure 2-14: Release Icon in the Job Manager window
Note: When you release a new job, sets from the job before may be left in
the Stacker / Stackers.
8 Highlight any External Profile shown in the On-line Finishers tab
window and click Disable. The green check-mark in the Enabled
column of the highlighted profile should now have switched to a red X
as shown in the figure below.
Figure 2-15: On-line Finishers tab
Release Icon
Enabled column
To Next Page
Loading...
Need help?
General
