Step 3 Choose the correct port setting that is used for connecting the cutter to your
computer (Figure 3-2).
If you are using the USB cable, choose USB0 from the pull down menu. If you are
using a Serial cable, choose either COM1 or COM2. Make sure no other devices
are occupying the port that you are going to use.
Step 4 Press the Connect button to connect your computer and the cutter.
If the connection succeeds, the model info, firmware version, and adjustable
parameter columns will be shown (Figure 3-3).
3.2.2 Functions of VLCD
Below are the functions adjustable through the VLCD for Sable.
Poll Size
Force
Media Weight
Offset
Auto Unroll
Update Setting
Vector Smooth
To Next Page
Loading...
