85°F).
• Select a location in which the relative humidity remains between 30% - 40%.
• Select a location in which there is a short, direct path to the fume exhaust system.
• Set the LaserPro C180II on a floor surface that is completely even.
• Make sure your smoke or fire detection system in the immediate area is functioning.
• Setup the machine to be at least 60 cm (2 feet) away from the wall.
NOTE
SmartGUARD™ is an optional fire detection alarm system developed by GCC. Contact
your local GCC authorized distributor for more details for having this safety option
installed onto your system.
1.7 Noise Test
Test Conditions: measured at a distance of 1 meter from the surface of the machinery and a height of 1.6 meters
from the floor or access platform.
y C180II 30W Sound Test Result: 56.9 dB
To Next Page
Loading...
