16
2.1 Unloading and Unpacking
The LaserPro C180II is shipped in one crate that contains the machine, the software, and all of the necessary
accessories. The following section contains detailed step-by-step instructions for unpacking and assembly of
the
machine.
WARNING
More than one person may be needed when loading and unloading the shipping crate in order
to avoid body injury or damage to the machine .To prevent personal injury or damage to the
machine, please obtain assistance when loading and unloading the shipping crate.
NOTE
Please save the original shipping crate. If the machine must be returned for product
servicing, it will need to be packed in its original shipping crate.
Before unpacking the laser system, make sure the location in which you intend to install the laser system will have
at least 2 feet (0.6meter) of clearance on all sides of the machine.
To Next Page
Loading...
