141 232001840G(08)
10.2
LaserPro
C180II Series
Specification
Sheet
* Speed does not equal to throughput. See dealer or visit www.GCCworld.com for more details.
*
Specifications are subject to change without prior notice.
*Caution—Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
LaserPro C180 II
Work Area 18x12 in. (458 x305 mm)
Maximum Part Size 19.8 x 12.2 x 6 in.(505 x 309 x 170 mm)
Table Size 20.4 x 14.7 in.(520 x 375 mm)
Dimensions 29.1 x 30.7 x 16.1 in.(740 x 780 x 410 mm)
Laser Source 12W/30W/40W Sealed CO2 Laser
Drive Closed-loop DC Servo Control
Maximum Motor Speed 40 IPS
Throughput* 176.3 in2 / hr (1137 cm
/ hr)
Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed
settings per job
Power Control Adjustable from 0~100% (Up to 16 color-linked speed
settings per job
Z-Axis Movement Automatic
DPI Available 125,250,300,380,500,600,760,1000, 1500
Focus Lens Standard 2.0”, Optional 1.5” available
Computer interface Full-speed USB 2.0 port, 10 Base-T Ethernet
Compatible Operating
systems
MS Windows
Display Panel
4-line LCD panel showing current file name, total working
time, laser poser, engraving speed, file(s) loaded into
memory buffer, setup and diagnostic menus
Safety
Class I Laser Product Complies with EN60825
Class II Laser Product Complies with CDRH
2006/42/EC Machinery Directive Compliance
Facility Requirements
Electrical 100-240VAC, 50-60Hz Auto Switching, Max. 12A
To Previous Page