87 232001840G(08)
If you would like to specify your own colors to designate to a particular laser setting, then all you have
to do is to double-click on that particular pen color from the pen menu and a color manager window
will open where you can select “define custom colors” to define your own color (shown in the picture
below). This is useful when your image is composed of colors that are not part of the pen menu’s
default color selection, and instead of modifying your image, you simply would like to assign the laser
settings based on the existing colors based on your current image.
NOTE
The LaserPro C180II print driver cannot store more than 16 pen colors or different laser
parameter settings per file.
To Next Page
Loading...
