GE Multilin 869 - Activity Status

2-12 8 SERIES PROTECTIVE RELAY PLATFORM – COMMUNICATIONS GUIDE
STATUS CHAPTER 2: COMMUNICATION PORTS
Activity Status
The communication state for each enabled communication type is shown by its value. The
main CPU and Comms software sets/resets the active bits for all enabled communication
types. The communication state bits are not latched.
Path: Status > Communications > Activity Status
SERIAL MODBUS
Range: NONE, ACTIVE
Default: NONE
SERIAL DNP
Range: NONE, ACTIVE
Default: NONE
SERIAL IEC103
Range: NONE, ACTIVE
Default: NONE
ETHERNET MODBUS
Range: NONE, ACTIVE
Default: NONE
ETHERNET DNP
Range: NONE, ACTIVE
Default: NONE
ETHERNET IEC104
Range: NONE, ACTIVE
Default: NONE
ETHERNET IEC61850
Range: NONE, ACTIVE
Default: NONE
ETHERNET GOOSE
Range: NONE, ACTIVE
Default: NONE
ETHERNET DEVICENET
Range: NONE, ACTIVE
Default: NONE
ETHERNET PROFIBUS
Range: NONE, ACTIVE
Default: NONE