8 SERIES PROTECTIVE RELAY PLATFORM – COMMUNICATIONS GUIDE 10-1
8 Series Protective Relay Platform
Chapter 10: File Transfer Protocols
GE
Grid Solutions
File Transfer Protocols
The base offering of 8 Series relay supports Trivial File Transfer Protocol (TFTP). The default
port 69 is always used. No configuration setting is available. When the communications
module is present, SSH File Transfer Protocol (SFTP) is also available. The default TCP port
22 for SSH is used for SFTP as well.
Reading Event Recorder
To read the entire event recorder contents (the only available format), use the following
filename:
Evt.txt
Event Record retrieval example:
tftp -i 172.16.0.2 get evt.txt
To Next Page
Loading...
