1200C-2000C Fire Alarm Control Panel, Repeater, and Black Box Installation Manual 29
Basic configuration options
The protocol, operating mode, and language are selected via System Setup menu on
the control panel LCD screen (System > Configuration > System Setup).
Protocol and operating mode
The following protocols are supported:
• 900 series
• 2000 seriesl
The following operating modes are supported:
• EN mode
• VdS mode
• NEN mode
• EP mode
• BS mode
Note: VdS mode is only available on control panels with a VDS2000 module installed.
Language groups
Each panel is shipped with one language group. A language group may include up to
five languages.
Table 7: 1200C-2000C language groups
Group 0 Group 1 Group 2 Group 3 Group 4 Group 5
English English English English English English
Dutch (Holland) Polish Danish Lithuanian Italian Romanian
Dutch (Belgium) Hungarian Swedish Estonian Spanish Greek
French Czech Norwegian Latvian Portuguese Luxemburgish
German Slovak Finnish Russian Brazilian English
LCD contrast
The LCD screen contrast can be adjusted using the potentiometer on the PS1200N
power supply interface module (see “PS1200N power supply interface module
connections”
on page 20).
To Next Page
Loading...
Need help?
General
