GE CT-9800

GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM
Rev. 19 Direction 18000
4-11-3
3D Options
The following prompts appear only if the 3D Option is installed.
CURRENT 3D SHADING PARAMETERS
AMBIENT LIGHT nn
DEPTH SHADING nn
NEW AMBIENT LIGHT (0 - 1000):
NEW DEPTH SHADING (0 - 1):
Miscellaneous Parameters
CURRENTLY LINE PRINTER IS: PRESENT
LINE PRINTER (Y/N):
CURRENTLY IMAGE COMPRESSION TO TAPE IS: PRESENT
IMAGE COMPRESSION TO TAPE (Y/N):
OR
CURRENT ARCHIVE MEDIUM IS: OPTICAL DISK (If you answer “I” to this question, Optical Disk will be
NEW ARCHIVE MEDIUM, IMAGE TAPE OR OPTICAL DISK (I/O):out of the system. To reinstall Optical
Disk as the archive media, you must
repeat the LFC procedure.)
CURRENT NUMBER OF DATA LINK STATIONS:
NEW NUMBER OF DATA LINK STATIONS: (can only increase number and define the new stations)
DATALINK ERROR LOGGING CURRENTLY OFF
DO YOU WANT DATALINK TO LOG ERRORS? (Y/N):
RECON Priority Above DATALINK
WF or Later A new feature allows a user the option to run RECON at a higher
priority. Refer to CT9800 Quick Manager User Manual, Direction
17109, Rev. 7 for more information.
Change to Existing (Pre-WF) Manuals: New for WF.
Description: The new option to run RECON at a higher priority above DATALINK
allows batch reconstructions to proceed without interference from
DATALINK. This is particularly useful during the DYNAMIC
scanning of images when DATALINK AUTO TRANSMIT is active.
RECON reprioritization is accessed through the R-level program
REGEN. REGEN displays the current RECON priority and asks for
the new priority setting as follows:
CURRENT RECON PRIORITY SETTING IS: HIGH (or NORMAL)
NEW RECON PRIORITY SETTING, HIGH OR NORMAL? (H/N):
You may change the priority by entering either H or N. As with all
REGEN questions, a <RETURN> indicates no change.
NOTE: When this option is activated, RECON’s priority is elevated above DATALINK and the DC functions
MANAGE, DISPLAY, and REFORMAT. As a result, their operation will be slowed. The higher priority level
is not high enough to interfere with PIPELINE, SCAN, and the OC functions MANAGE, DISPLAY, and
REFORMAT.