GE
Sensing
DECLARATION
OF
CONFORMITY
DOC-0003, Rev. C
We, GE Sensing
1100 Technology Park Drive
Billerica, MA 01821
USA
declare under our sole responsibility that the
DigitalFlow™ XGF868i Ultrasonic Flare Gas Flow Transmitter
DigitalFlow™ XGM868i Ultrasonic Gas Flow Transmitter
DigitalFlow™ XGN868i Ultrasonic Natural Gas Flow Transmitter
DigitalFlow™ XGS868i Ultrasonic Steam Flow Transmitter
DigitalFlow™ XMT868i Ultrasonic Liquid Flow Transmitter
DigitalFlow™ IGM878i Ultrasonic Industrial Gas Flow Transmitter
to which this declaration relates, are in conformity with the following standards:
• EN 60079-0: 2009
• EN 60079-1: 2007
• II 2 G Ex d IIC T5; ISSeP07ATEX015 (ISSeP, B7340 Colfontaine, Belgium - NoBo 492)
• EN 61326-1: 2006, Class A, Annex A, Continuous Unmonitored Operation
• EN 61010-1: 2012, Overvoltage Category II
following the provisions of Directives 2004/108/EC EMC and 94/9/EC ATEX.
Where products were initially assessed for compliance with the Essential Health and Safety Requirements of the
ATEX Directive 94/9/EC using earlier harmonized standards, a subsequent review has determined that “technical
knowledge” is unaffected by the current harmonized standards listed above.
Billerica - October 2013
Issued Mr. Gary Kozinski
Certification & Standards, Lead Engineer
To Next Page
Loading...
