DigitalFlow™ XMT868i Startup Guide 61
Chapter 4. Specifications
4.2 Electrical
The electrical specifications for the Model XMT868i flow transmitter are divided into the following categories.
4.2.1 Power Supply
Options:
Standard: 95 to 240 VAC, 50/60 Hz, ± 10%
Optional: 12 to 28 VDC, ± 5%
Power Consumption:
20 W maximum
4.2.2 Operating Modes
Flow Measurement:
Standard: Correlation Transit-Time™ Mode with clamp-on or wetted transducers
Energy Measurement (optional):
To calculate energy flow rate, use Analog Input Board for transmitters. Use RTD Input Board for direct RTDs.
4.2.3 European Compliance
See the Certification & Safety Statements and the CE Declaration of Conformity at the end of this manual.
To Next Page
Loading...
