GE DigitalFlow XMT868i User Manual

DigitalFlow™ XMT868i Startup Guide 71
Appendix B. Data Records
B.3 Site Data
After the Model XMT868i flow transmitter has been installed, specific site data must be entered via the Keypad
Program, prior to operation. Record that information in Table 24 below.
Table 24: Site Data
General Information
Model # Serial #
Software Vers. Setup Date
GLOBL-SYSTEM
Meter Message Vol. Dec. Digits
System Units English Metric Totalizer Units
Vol. Units Tot. Dec. Dig.
GLOBL-I/O-ERROR
Error Handling 2-Path Error No Yes
GLOBL-COMM
Meter Address MOD. Parity
Baud Rate MOD. Stop Bits
MOD. Baud Rate MOD. Address
CHANNEL X-ACTIV
Channel 1 Channel 2 (if applicable)
Channel Status
Off
1
Trans Channel Status
Off
1
Trans
CHANNEL X-SYSTM
Channel 1 Channel 2 (if applicable)
Channel Label Channel Label
Chan. Message
2
Chan. Message
2
Energy Option On Off Energy Option On Off
Vol. Units Vol. Units
Vol. Dec. Digits Vol. Dec. Digits
Totalizer Units Totalizer Units
Tot. Dec. Dig. Tot. Dec. Dig.
Mass Flow Mass Flow
Mass Flow Time Mass Flow Time
MDOT Dec. Dig. MDOT Dec. Dig.
Mass Totals Mass Totals
Mass Dec. Digits Mass Dec. Digits
Power Power
Power Dec.Dig. Power Dec. Dig.
Energy (Total) Energy (Total)
Energy Dec. Dig. Energy Dec. Dig.
Heat. or Cool. Heat. or Cool.
Flow Meas. Flow Meas.
1
not available for 1-Channel meter,
2
”Site Message” for 1-Channel meter

GE DigitalFlow XMT868i Specifications

General

Brand	GE
Model	DigitalFlow XMT868i
Category	Transmitter
Language	English