GE DigitalFlow XMT868i User Manual

Appendix B. Data Records
72 DigitalFlow™ XMT868i Startup Guide
CHANNELx-I/O
Zero Cutoff Temp. Input Fixed ( ) Live
Pipe/Transducer Parameters - PIPE
Channel 1 Channel 2 (if applicable)
Trans. Type STD SPEC Trans. Type STD SPEC
Transducer # Transducer #
Special Transducers Special Transducers
Wedge Type Rayl Shear Wettd Wedge Type Rayl Shear Wettd
Frequency Hz Frequency Hz
Trans. Tw Trans. Tw
Wedge Angle Wedge Angle
Wedge Sndspd Wedge Sndspd
Pipe Material Pipe Material
All Clamp-On and Wetted Transducers All Clamp-On and Wetted Transducers
Pipe O.D. Pipe O.D.
Pipe Wall Pipe Wall
Path Length (P) Path Length (P)
Axial Length (L) Axial Length (L)
Lining Yes No Lining Yes No
Lining Material Lining Material
Lining Sndspd Lining Sndspd
Lining Thickness Lining Thickness
Track. Window. Yes No Track. Window. Yes No
Fluid Type Fluid Type
Other/Sndspd Other/Sndspd
% of Water % of Water
Reynolds Corr. Off Active Reynolds Corr. Off Active
KV Input Sel. Table Static KV Input Sel. Table Static
Kin. Visc. Kin. Visc.
Cal. Factor Cal. Factor
# of Traverses # of Traverses
Trans. Spacing Trans. Spacing
Response Time Response Time
CHANNELx-SETUP-ADVANCED FEATURES -MASS FLOW
Mass Flow No Yes Mass Flow No Yes
Static Density Static Density
CHANNELx-SETUP-ADVANCED FEATURES-CODE LENGTH
Code Length Auto Short Long Code Length Auto Short Long
Table 24: Site Data (cont.)

GE DigitalFlow XMT868i Specifications

General

Brand	GE
Model	DigitalFlow XMT868i
Category	Transmitter
Language	English