To Next Page

To Previous Page

Page 55

Hydran* M2-X Installation Guide

MA-028 Rev. 2.1, 11-Jun-20

• Possible short-duration exposure: Oil up to 120 °C (248 °F)

Oil Pressure

• Vacuum-resistant sensor; 0–700 kPa (0–100 psia)

• Note: for units designated as Class I Div II Hazardous

Locations, working oil pressure 2 bar absolute (1 bar gauge)

Power Supply

• 100-120 Vac, 200-240 Vac, 50/60 Hz, 650 VA maximum

EMC

Compatibility

Meets standards EN 55022, IEC/EN 60255-22-1, IEC/EN 61000-3-

2, IEC/EN 61000-4-2, IEC/EN 61000-4-3, IEC/EN 61000-4-4,

IEC/EN 61000-4-5, IEC/EN 61000-4-6, IEC/EN 61000-4-8, IEC/EN

61000-4-1 1

Environment

Meets standards IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6,

IEC 60068-2-30

Safety

Meets standard IEC 61010-1/EN 61010-1/UL61010-1/CSA C22.2

No.61010-1; HazLoc marked units UL120201 / CSA C22.2 No. 213

Weight

• Installed: 7.5 kg (16.5 lb)

• Shipping: 9 kg (20 lb)

ENVIRONMENTAL CONDITIONS

Operation

Ambient temperature: -40 to +55 °C (-40 to +131 °F)

Relative humidity: 95 % RH, non-condensing

Altitude: up to 2,000 m (6,500 feet).

Storage

Temperature: +5 °C to +45 °C (+41 °F to +113 °F)

Storage period should not exceed 6 months.

Note: General Electric has made every reasonable attempt to ensure the completeness and

accuracy of these technical specifications. However, the information contained in these technical

specifications is subject to change without notice, and does not represent a commitment on the

part of General Electric.

GE Hydran M2-X Installation Guide

Other manuals for GE Hydran M2-X