iBox/iBox Kit
Installation and Maintenance Guide
GE Grid Solutions
994-0047-5.10-4 GE Information
Downloading your iBox Configuration - LAN
Introduction
The first time you configure your iBox, you will need to connect your PC to the iBox
WESMAINT port, as shown below:
Procedure:
Downloading
your iBox
configuration
through the
WESMAINT
port
Refer to “Downloading your iBox Configuration” on page 41 for instructions on how
to download a configuration file to the iBox through the WESMAINT port.
Note: Once you have configured the iBox PPP driver and the Ethernet Module,
you will be able to download your iBox configuration over the LAN, as
outlined in “Downloading your iBox Configuration over the LAN” on page
136.
Next Step
The next step is:
• Configuring the Ethernet Module on page 109
To Next Page
Loading...
Need help?
General
