Careand cleaning of the range.
BurnerGratesand CenterGrate
Porcelain eimmel burner grates and the
vent grille should be washed regularly
and, of com_e, after spillove_.
_hsh them in hot, soapy water and
rinse with clean water: You may also use
abrasive cleane_ and scotwing pads to
clean burner grates and the vent grille.
D_' tile grams and grille with a cloth--
don't put them back on tile cooktop wet.
To get rid of btlFned-on food, place tile
grates and grille in a covered containe_:
Add l/4 cup ammonia and let them soak
several houI_ or overnight. Wash, rinse
well and (h_'.
_Mthough they're durable, tile grates
and grille will gradually lose their shine,
regardless at the best care you can give
them. This is due to their continual
exposm'e to high temperatures.
Do not operate a burner fin" an extended
period of time without cookware on tile
grate. Tile finish on tile grate ma) chip
without cookware to absorb tile heat.
_fter cleaning, replace tile center grille
fi_t. Replace the side grates so that the
notches lock over tile tabs on tile center
grate. Make sm'e the grates are positioned
securely over tile burne_ and that tile}'
are stable and level.
Rubber Grate Feet
For stability, your cooktop has rubber
teet on the burner grates. If am' of these
rubber teet should become damaged or
lost, replace them immediately.
To order replacement robber gram feet,
please call our toll-fl'ee immber:
National Parts
Center ............... 800.626.2002(U.S.)
888.261.3055(Canada)
Rubber Grate Feet ....... #WBO2TI0101
Socket
Receptacle.
, ,%
, ,i i i
i i i i
i i
....
i
, , ,
Glasscover
3O
Oven Light Bulbs
NOTE,"The glass cover should be
removed only when cold. Wearing latex
gloves may offer a better grip.
CAUTION.Beforereplacingyour
oven light bulb, disconnect the electrical
power to the oven at the main fuse or
circuit breaker panel
Be StlI'e to let tile light co_,er and bulb
cool completely.
For yam" salbt_ do not touch a hot bulb
with bare hands or a damp cloth.
Toremove:
[] Turn tile glass co_er
counterclockwise 1/4 mrn until tile
tabs of tile glass co_er clear tile
grooxes of the socket.
[] Using gloxes or a dry cloth, relnoxe
tile bulb b) Imllin("_ it straight out.
Toreplace:
[] Use a new 130-\olt halogen bulb,
not t() exceed 50 watts.
[] Using gloxes or a dry cloth remoxe
tile bulb fl'om its packaging. Do not
touch the bulb with bare finge_s.
/
%ceDtacle
use g 0ves
Or Cl0[Ir
[] Push the bulb straight into the
receptacle all the way.
[] Place the tabs of the glass cover into
the grooves of tile socket. Turn the
glass cover clockwise 1/4 mrn to
engage.
For improved lighting inside
the oven, clean the glass cover
fl'equenfly using a wet cloth. This
should be done when the oven is
c(m_pletely co()l.
] Reconnect electrical power 1o
the ovel].
To Next Page
Loading...
Need help?
General
