GE JGB3000 - Oven; Oven Control

Usingtheovencontrols.
Throughout this manual, features and appearance may vary from your model.
en Contrails
/
Temp Recall
0
Coot:s
["Kltchen_ ["-Cioc k-"_
k_Tim k2.....LJ
On / Off
('_-Oven-_ ['c-o°: ing_ [r st_rt-"_
k TimeJkTimeJ
10
OvenControl,Clockand TimerFeaturesand Settings(onsomemodels)
Bake/Temp Recall Pad
Touch this pad to select the bake function.
Bake Light
Flasheswhilein edit mode-you can change
the oventemperature at this point. Glowswhen
the ovenisin bakemode.
Start/On Pad
Mustbe touchedto start any cookingor cleaning
function.
Display
Showsthe time of day, oventemperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
Thedisplaywill show PREwhile preheating.
When the oven reaches the selected
temperature, the oven control will beep and
the display will show the oven temperature.
If "F-" and a number or letter flash in the display
and the oven control signals,this indicatesa function
error code.
Ifyour oven was set for o timed oven operation
and a power outage occurred, the clock and all
programmed functions must bereset.
Thetime of day will flash in the display when there
has beena power outage.Resetthe clock.
If the function error codeappears during the
self-cleaningcycle,checkthe ovendoor latch. The
latch handle may have beenmoved,evenif only
slightly,from the latchedposition. Makesure the
latch is moved to the right asfar asit will go.
Touch the Clear/Off pad. Allow the oven to cool
for one hour.Putthe oven back into operation.
If the function error coderepeats,disconnect
thepower to the range and call for service.
Kitchen Timer On/Off Pad
Touch this pad to select the timer feature.
Thenpressthe + and - padsto adjust the timer.
Timer Light
Flasheswhilein edit mode-you can change
the settime at this point. Glowswhen the timer
hasbeenactivated. Flashesagainwhen the time
hasrun out untilthe control isreset.
Clock Pad
Toset the clock, pressthis pad twice and then
pressthe + and - pads.The time of day will
flash inthe display when the oven isfirst
turned on.
Start Time Pad (on some models)
Usealong with the Cooking Time or Self Clean
pads to set the ovento start and stop
automatically at a time you set.
Start Time Light
Flasheswhilein edit mode-you can change
the starttime at this point. Glowswhen the
function hasbeenactivated.
Cooking Time Pad (on some models)
Touch this pad and then touch the + or - pads
to set the amount oftime you want your food
to cook. Theovenwill shut off when the
cooking time has run out.
Cooking Time Light
Flasheswhilein edit mode-you can change
the settime at this point. Glowswhen the
function hasbeenactivated. Flashesagain when
thetime has run out until the control is reset.