Chapter 2: Installation
6 Kilsen KFP-CF Series Installation Manual
Cabinet installation
Before you begin
• Remove the front cover
• Remove cable knockouts from the top, bottom, and rear of the cabinet as
required
Where to install the cabinet
Make sure the installation location is free from construction dust and debris, and
immune to extreme temperature ranges and humidity (see “Chapter 5
Technical specifications” on page 49 for more information on the operating
temperature and relative humidity specifications).
Allow for enough floor and wall space so the panel can be installed and serviced
without any obstructions. The cabinet should be mounted so that the user interface is
at eye level.
To Next Page
Loading...
