GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
8-2 Section 8-1 - Overview
8-1-3 Electrostatic Discharge (ESD) Prevention
WARNINGWARNING
DO NOT TOUCH ANY BOARDS WITH INTEGRATED CIRCUITS PRIOR TO TAKING THE
NECESSARY ESD PRECAUTIONS:
1.) Always connect yourself, via an arm-wrist strap, to the dedicated ground
point located on the rear of the scanner (to the left of the power
connector) or a proper frame ground.
2.) Follow general guide lined for handling of electrostatic sensitive
equipment.
To Next Page
Loading...
