GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
4-6 Section 4-2 - General Procedure
4-2-3 System Restart/Shutdown
Purpose: This is a description on how to Shutdown the system.
4-2-3-1 Complete Power Shutdown
1.) Press the ON/OFF
key at the front of the System for about two (2) seconds. Refer to Figure 4-12
on page 4-3.
2.) Switch OFF the Main Circuit Breaker at the rear of the system Refer to Figure 4-11 on page 4-2.
3.) Disconnect the Main Power Cable if needed. Refer to Figure 4-11 on page 4-2.
To Next Page
Loading...
