GE LOGIQ S6

GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
8-12 Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4)
8-3-5-6 Printer Registration
1.) Select Utility > Connectivity > Button.
2.) Write down the printer names which are registered to Print1 through Print4.
3.) Click on >> to add Printflow View.
Figure 8-119 Button Setting Screen
Table 8-65 Recording Active Imager Printer
Button Active Image Printer
Print1
Print2
Print3
Print4
PrintScreen
Select Print x
button to
display the
printer name
here.