GE HEALTHCARE
DIRECTION 5162630, REVISION 3 LOGIQ™ S6 SERVICE MANUAL
8-26 Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4)
8-3-8-6 TCP/IP Filter Setup
1.) On the desktop, left-click on My Network Places, then right-click on Properties...
2.) Double-click Local Area Connection or Local Area Connection #2 (if you do NOT find "Local
Area Connection").
3.) Select Internet Protocol (TCP/IP) , then click Properties button.
Figure 8-140 Local Area Connection
Figure 8-141 Internet Protocol
To Next Page
Loading...
