GE MultiLink ML1200 User Manual

1–4 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
INTRODUCTION CHAPTER 1: INTRODUCTION
1000BASE-SX, full-duplex, multi-mode(50μm cable):............550m
1000BASE-LX, full-duplex, single-mode(62.5μm cable): ......5Km
FIBER MULTI-MODE CONNECTOR TYPES SUPPORTED:
Fiber Port, ST-type (twist-lock): ........................................................Fiber multi-mode, 10Mb 10BASE-FL
Fiber Port, MTRJ-type (plug-in):........................................................SFF Fiber multi-mode100BASE-FX
Fiber Port, SC-type (snap-in): ............................................................Fiber optic multi-mode, 100BASE-FX
Fiber Port, ST-type (twist-lock): ........................................................Fiber optic m.-mode, 100BASE-FX
Fiber Port, 1000BASE-FX, SFP modules
FIBER SINGLE-MODE CONNECTOR TYPES:
Fiber Port, SC-type:................................................................................Fiber optic single-mode, 100BASE-FX
Fiber Port, LC-type:................................................................................Fiber SFF single-mode, 100BASE-FX
Fiber Port, 1000BASE-FX, SFP modules
LEDS PER PORT (ONE SET AT THE PORT, ONE SET ON SWIVEL TOP ON RIGHT SIDE)
LK: .................................................................................................................Steady ON when media link is
operational
ACT: ..............................................................................................................ON with receiver port activity
FDX/HDX: ...................................................................................................ON = Full-Duplex ModeOFF = Half-
Duplex Mode
100/10: .......................................................................................................ON = 100Mbps speedOFF = 10 Mbps
OPERATING ENVIRONMENT
Ambient Temperature: ........................................................................-40° to 140° F (-40° to 60°C) for
UL60950 and Component Parts rating
-60° to 195° F (-50° to 85°C) for IEC
60068 Type Test short term rating
Storage Temperature:..........................................................................-60°to 210°F (-50°to 100°C)
Ambient Relative Humidity:...............................................................5% to 95% (non-condensing)
Altitude:.......................................................................................................-200 to 13,000 ft. (-60 to 4000m)
Conformal Coating (humidity protection) option: ..................Request quote
ALARM RELAY CONTACTS
One NC indicating internal power, one NC software controllable
PACKAGING
Enclosure: ..................................................................................................High strength extruded aluminum
Dimensions: .............................................................................................6.85 in. H x 7.5 in. W x 2.0 in. D
17.4 cm H x 19.1 cm W x 5.08 cm D
Cooling method: .....................................................................................Convection, fully-enclosed ribbed-
surface aluminum case used as a
sink, designed for vertical mounting,
no fans
Weight: .......................................................................................................3 lbs. (1.3 kg)
MANAGEMENT CONSOLE CONNECTOR
Serial DB15 or RJ-45, see details at sec. 3.7
DC POWER SUPPLY (INTERNAL, FLOATING GROUND DESIGN)
12VDC Power Input nominal (range 8 to 18VDC
24VDC Power Input nominal (range 18 to 36VDC)
-48VDC Power Input nominal (range 36 to 60VDC)
125VDC Power Input nominal (range 88 to 150VDC)
250VDC Power Input nominal (range 160 to 300VDC)
Std. Terminal Block : “ -, GND, + ”

GE MultiLink ML1200 Specifications

General

Brand	GE
Model	MultiLink ML1200
Category	Switch
Language	English