17–12 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
MISCELLANEOUS COMMANDS CHAPTER 17: MISCELLANEOUS COMMANDS
Event logs can be exported to a ftp or a tftp server on the network for further analysis. The
CLI command is used to facilitate the export of the event log
exportlog mode=<serial|tftp|ftp> <ipaddress> file=<name> doctype=<raw|html>
Where
mode is the mode of transfer, ipaddress is the IP address of the ftp or TFTP server,
file is the filename, and doctype indicates the log is saved as a text file (raw) or as an
HTML file.
Please ensure the proper extension is used for the
file argument (for example, “html” for
an HTML file).
ML1200# exportlog mode=tftp 192.168.5.2 file=eventlog
doctype=html
Do you wish to export the event logs? [ 'Y' or 'N'] Y
Successfully uploaded the event log file.
ML1200#
exportlog mode=tftp 192.168.5.2 file=eventlog.txt
doctype=raw
Do you wish to export the event logs? [ 'Y' or 'N'] Y
Successfully uploaded the event log file.
17.7.3 EnerVista Example
The EnerVista Secure Web Management software provides and overview of the type of
Logs by reviewing the statistics. Each specific log can be viewed by viewing the logs menu.
To view the log statistics,
Z Select the Configuration > Statistics > Log Statistics menu item.
The Log Statistics window displays the logged events received – most logs are typically
informational and activity.
The log buffer size can be controlled through this menu.
To Next Page
Loading...
Need help?
General
