GE MultiLink ML1200

15–8 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
IGMP CHAPTER 15: IGMP
15.2.2 Example
The following example shows how to configure IGMP.
Example 15-1: Configuring IGMP
ML1200(igmp)##
set-port port=2-4 mode=forward
Port mode is set.
ML1200(igmp)## show-port
---------------------
Port | Mode
---------------------
1 | Auto
2 | Forwarding
3 | Forwarding
4 | Forwarding
5 | Auto
6 | Auto
7 | Auto
ML1200(igmp)## show-router
RouterIp PortNo Timer
---------------------------------
10.21.1.250 1 25
(continued on next page)