GE MultiLink ML1200 - Configuration Commands

17–16 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
MISCELLANEOUS COMMANDS CHAPTER 17: MISCELLANEOUS COMMANDS
• save
•
whoami: display the user information
•
reboot
•
authorize
•
degrade
•
exportlog mode
•
ftp
•
help
•
ipconfig
•
kill
•
kill session id
•
logout: logs out from the current user
•
ping: to send the ping requests
•
tftp
•
telnet: connects to the remote system through telnet
•
terminal: to set the terminal size
•
xmodem
17.8.2 Configuration commands
The access commands are shown below.
•
allow: allows the IP address
•
deny: denies the IP address
•
dhcp: enables or disables the DHCP
•
modbus: enables or disables access to Modbus map
•
remove
•
removeall
•
snmp: enables or disables SNMP
•
ssl
•
telnet
•
web
The alarm commands are shown below.
•
add
•
alarm
•
del
•
period
The authorization commands are shown below.
•
auth
•
authserver
•
backend
•
clear-stats