GE MultiLink ML1200

11–8 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
VLAN REGISTRATION OVER GARP CHAPTER 11: VLAN REGISTRATION OVER GARP
Example 11-2: Configuring GVRP
ML1200#
gvrp
ML1200(gvrp)#
show gvrp
GVRP Status : Enabled
ML1200(gvrp)## gvrp disable
GVRP is now disabled
ML1200(gvrp)## gvrp enable
GVRP enabled
ML1200(gvrp)## show-vlan
=================================================
VLAN ID | NAME | VLAN | STATUS
=================================================
1 | Default VLAN | Static | Active
2 | Blue | Static | Active
6 | dyn6 | Dynamic | Active
ML1200(gvrp)## static vlan=10
ML1200(gvrp)##
show-vlan
=================================================
VLAN ID | NAME | VLAN | STATUS
=================================================
1 | Default VLAN | Static | Active
2 | Blue | Static | Active
6 | dyn6 | Static | Active
ML1200(gvrp)## set-forbid vlan=2 forbid=3-5
ML1200(gvrp)##
show-forbid
============================================
VLAN ID | FORBIDDEN PORTS
============================================
1 | None
2 | 3, 4, 5
ML1200(gvrp)##