GE MultiLink ML1200

CHAPTER 14: QUALITY OF SERVICE QUALITY OF SERVICE
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL 14–7
Configuring QoS (continued)
ML1200(qos)##show qos
========================================
PORT | QOS | STATUS
========================================
1 | Port | DOWN
2 | Tag | DOWN
3 | None | DOWN
4 | None | DOWN
5 | None | DOWN
6 | None | DOWN
7 | None | DOWN
ML1200(qos)##
show qos type=tag
========================================
PORT | Tag | STATUS
========================================
1 | | DOWN
2 | 6 | DOWN
3 | | DOWN
4 | | DOWN
5 | | DOWN
6 | | DOWN
7 | | DOWN
ML1200(qos)##
setqos port=3 priority=high type=tag tag=5
Successfully set QOS.
ML1200(qos)##
show qos type=tag
========================================
PORT | Tag | STATUS
========================================
1 | | DOWN
2 | 6 | DOWN
3 | 5 | DOWN
4 | | DOWN
5 | | DOWN
6 | | DOWN
7 | | DOWN
The queue behavior is set so that 8
high-priority packets and 1 low-priority
packet is sent out.