GE NX-10 Installation Guide

Location Term Definition
6.1.1.1.2 Arm Away A menu option that enables the arm away function for the
selected proximity reader action. The actions are Single
Badge, Double Badge and Badge Hold.
6.1.1.1.3 Arm Stay A menu option that enables the arm stay function for the
selected proximity reader action. The actions are Single
Badge, Double Badge and Badge Hold.
6.1.1.1.4 Disarm A menu option that enables the disarm function for the
selected proximity reader action. The actions are Single
Badge, Double Badge and Badge Hold.
6.1.1.1.5 Keyfob Funct 1 A menu option that sends a keyfob function 1 event for the
selected proximity reader action. The actions are Single
Badge, Double Badge and Badge Hold.
6.1.1.1.6 Keyfob Funct 2 A menu option that sends a keyfob function 2 event for the
selected proximity reader action. The actions are Single
Badge, Double Badge and Badge Hold.
6.1.1.1.7 Broadcast X10 Function A menu option that causes the proximity reader to transmit
an X-10 function to the home automation system.
6.1.1.1.8 Activate Relay A menu option that activates the proximity reader’s built in
relay driver instead of an external relay driver.
6.1.2 X-10 Functions A menu entry that groups X-10 device information and the
functions for the selected proximity reader.
The X-10 functions are linked to the access reader. It is
possible to control X-10 devices using the badge on the
card reader. It is also possible to configure the actions that
are activated by each card action.
0 All units off
1 All lights on
2 On
3 Off All others
4 Dim
5 Bright
6 All lights off
6.1.2.1 Unit Code A menu option that sets the X-10 module number used to
identify a particular X-10 device on the selected module.
A NetworX bus module number is assigned to each system
module. The system uses this number to identify the
module. It is also used to report module problems (such as
tampers and module supervision lost) to the central station.
6.1.2.2 House Code A menu option that sets the code used to identify a
particular premises. It is necessary in case any
neighbouring premises also has an X-10 home automation
system.
More information on the X-10 home automation system
can be found at www.x-10europe.com.
6.1.2.3 Functions A menu entry that groups the functions that can be linked
between a NX-1701E proximity reader and X-10 functions.
6.1.2.3.1 Single Badge (1 Beep) A menu option that sets the X-10 function sent when a
proximity card is held against the proximity reader once.

GE NX-10 Specifications

General

Brand	GE
Model	NX-10
Category	Security System
Language	English