EasyManuals Logo

GE Profile PHB925SB1SS User Manual

GE Profile PHB925SB1SS
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
– 11 –
Special features of your oven control.
12-Hour Shutdown
Touch the DELAY START pad until
no shdn (no shut-off) appears in the
display.
Touch the START pad to activate the no
shut-off and leave the control set in this
special features mode.
2
Your new touch pad control has additional features that you may choose to use. The following are the features and how you may
activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory
until the steps are repeated.
To enter a special feature for either oven, you must rst touch the upper oven BROIL HI/LO and BAKE pads at the same time. The
lower oven BROIL HI/LO and BAKE pads will not activate special features.
When the display shows your choice, touch the START pad. The special features will remain in memory after a power failure, except
for the Sabbath feature, which will have to be reset.
3
With this feature, should you forget and leave
the oven on, the control will automatically
turn off the oven after 12 hours during baking
functions or after 3 hours during a broil
function.
If you wish to turn OFF this feature, follow the
steps below.
1
Touch the upper oven BROIL HI/LO and
BAKE pads at the same time until the
display shows SF.
Your oven control is set to use the Fahrenheit
temperature selections, but you may change
this to use the Celsius selections.
1
Touch the upper oven BROIL HI/LO and
BAKE pads at the same time until the
display shows SF.
Fahrenheit or Celsius Temperature Selection
Touch the COOK TIME and BROIL HI/LO
pads at the same time. The display will
show F (Fahrenheit).
Touch the COOK TIME and BROIL HI/
LO pads again at the same time. The
display will show C (Celsius).
Touch the START pad.
2
3
4
Tones at the End of a Timed Cycle
START
BROIL
HI/LO
BAKE
+
KITCHEN
TIMER
ON/OFF
(on some models)
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the CLEAR/OFF pad is touched. This
continual 6-second beep may be cancelled.
To cancel the 6-second beep:
1
Touch the upper oven BROIL HI/LO and
BAKE pads at the same time until the
display shows SF.
Touch the BROIL pad. The display
shows CONTI BEEP (continuous beep).
Touch the BROIL pad again. The display
shows SINGLE BEEP. (This cancels the
one beep every 6 seconds.)
2
Touch the START pad.
3
OR
Touch the KITCHEN TIMER ON/OFF pad.
The display shows CON BEEP (continual
beep). Touch the KITCHEN TIMER ON/
OFF pad again. The display shows
BEEP. (This cancels the one beep every
6 seconds.)
(Continued next page)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE Profile PHB925SB1SS and is the answer not in the manual?

GE Profile PHB925SB1SS Specifications

General IconGeneral
BrandGE
ModelProfile PHB925SB1SS
CategoryRanges
LanguageEnglish

Related product manuals