– 56 –
ERC Failure Codes
The ERC (electronic range control) has error (F) codes that can be utilized by the service technician in order
to quickly identify failed or improper operation of certain range components. F-codes are not shown on the
display when they occur; they are stored in EEprom and can be retrieved.
Diagnostics and Service Information
F31 11:24
11:24
Note: For the fi rst 3 minutes after power up, the F-codes will show on the display.
Retrieve failure codes by pressing TIMER ON, CLOCK, and START.
(Continued next page)
To Next Page
Loading...
