GE RX3i

Chapter 3. Installation and Start-up: Rack-based and RX7i Embedded Interface
20 PACSystems* RX7i & RX3i TCP/IP Ethernet Communications User Manual GFK-2224Q
Chapter 3 Installation and Start-up: Rack-based and RX7i
Embedded Interface
This chapter describes the Ethernet Interface’s user features and basic installation procedures.
▪ Ethernet Interface Controls and Indicators
- Ethernet LEDs
- Ethernet Restart Pushbutton
▪ Module Installation
- RX7i CPU with Embedded Ethernet Interface
- Rack-based Ethernet Interface Modules
▪ Ethernet Port Connectors
- Embedded Switch
- Connection to a 10Base T / 100Base Tx Network
▪ Station Manager Port
▪ Verifying Proper Power-Up of the Ethernet Interface After Configuration
▪ Pinging TCP/IP Ethernet Interfaces on the Network
Features of the embedded RX7i CPU Ethernet Interface and the rack-based RX3i/RX7i Ethernet interfaces are
the same unless noted otherwise.
Note: For features, installation and startup of the RX3i embedded Ethernet interface, see
Chapter 2.