GE Smart Series - Setting Language and Date;Time

14 15
Setting Language and Date/Time
The Date/Time and Language setup page will
automatically appear when the camera is turned on for
the rst time.
To set the display language and date/time, go to the following
setup options in the General Setup menu.
• Language
• Date/Time
To access the General Setup Menu, follow the steps below:
1. Press
the Power button to turn the camera on.
2. Press the
func
menu
button, press Up/Down button to switch
between menus, select Set Menu, press
SET
button to enter
Set Menu.
Set Display Language
1. In the General Setup menu, press Up/Down button to
select Language, press
SET
or Right button to enter setting
mode.
2. Use the Up/Down/Left/Right buttons to select the desired
language.
3. Press the
SET
button to conrm the setting.