Chapter 5. Displaying and Configuring Data
98 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
5.5.1 Specifying the Number of Displayed Parameters
As mentioned earlier, the PT878 can display one to four different
measurement parameters simultaneously. However, sometimes you might
wish to display only one or two parameters. To change the number of open
display windows from within the Site Menu (shown in Figure 61 on
page 97), use the [
T]or [S] arrow keys to move to the desired number of
views (1 View, 2 Views, etc.) Press
[ENTER].
The screen displays the designated number of windows. For example,
Figure 62 below shows the screen displayed in Figure 58 on page 92,
reconfigured for a single view.
Figure 62: Display Screen Configured for Single View
Note: The PT878 opens display windows clockwise from the upper left; that
is, if you press “1 View,” the parameter displayed in the upper left
window appears. If you press “2 Views,” the parameters shown in
the two top windows appear. The view for “3 Views” adds the
window in the lower left, and that for “4 Views” adds the window in
the lower right.
2000/11/30 09:53 AM
Velocity, ft/s
E0: No Errors
ABC.SIT
12.2
-12.2
10 Seconds
-0.6014
To Next Page
Loading...
