Chapter 3. Programming Site Data
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual 61
3.11 Entering User Functions
User functions enable you to program mathematical equations on each
measurement. You can also use any parameter in the meter to calculate a
different parameter. To enter the User Functions option, scroll to the User
Functions entry on the Program Menu and press
[ENTER]. The screen
appears similar to Figure 32 below. To step through each parameter, press
the [T] key. Refer to Figure 151 on page 235 of Appendix A, Menu Maps.
Figure 32: User Functions Window
1. The first prompt asks you to select the function number, 1 through 8.
a. Press [ENTER] to open the drop-down menu.
b. Scroll to the desired function number (User F1, User F2, etc.).
c. Press [ENTER] to confirm the entry.
Set User Function
Function
User F1
Label
Units Sym
Dec. 0
Delete Check Done
To Next Page
Loading...
