Chapter 7. Logging Data
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual 135
7.3.1 Setting up a New Log
The New Log option enables you to create and set up parameters for a new
log. You can access this option in two ways:
• by scrolling to the New Log option in the Logging Menu (as shown in
Figure 88 on page 132) and pressing
[ENTER], or
• by scrolling to the New option in the File Menu of the Log Manager (as
shown in Figure 90 on page 134) and pressing
[ENTER].
In either case, the Create New Log screen appears similar to Figure 91
below. Use the four arrow keys to scroll to the desired letter or number, and
press
[ENTER]. Repeat this procedure until you have created the desired log
name. (Press
[F1], Delete, to remove any unwanted letters or numbers.)
When you have finished, press
[F3] (OK) to confirm the entry.
Figure 91: New Log Window
The PT878 now asks for log formatting and measurements. The screen
appears similar to Figure 92 on page 136.
6 7 8 9 - _ @ #
Delete
Cancel
OK
A B C D E F G H
I J K L M N O P
Q R S T U V W X
Y Z 0 1 2 3 4 5
Create New Log
& ( )
To Next Page
Loading...
