Chapter 8. Servicing the PT878
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual 199
8.12.2b Installing New Software
To begin the loading procedure, scroll down to the Flash Update entry in the
Service Menu and press
[ENTER]. The screen appears similar to Figure 133
below.
Figure 133: Flash Update Option
1. As shown in Figure 133 above, the Flash Update option erases all
instrument coding.
• Press [F2] (Cancel) to return to Operate Mode without erasing the
program.
• Press [F3] (OK) to confirm that you wish to erase the program.
Update Flash
OK
--WARNING--
This will erase the
instrumentation coding.
Choose ‘Cancel’ to exit or ‘OK’
to continue.
Cancel
To Next Page
Loading...
