Scan Assistant
Versana Essential – User Guide 2-37
5759238-100 English Rev. 2
Setting up Scan Assistant
To set up Scan Assistant,
1. Import the Scan Assistant Program created using the Scan
Assistant Creator or exported from another Versana
Essential program.
a. Insert the media with the saved Program from the Scan
Assistant Creator or exported program from another
Versana Essential.
b. Press Utility -> Scan Assistant.
c. Select Import from the Scan Assistant Manager page.
Figure 2-19. Import Programs
d. In the Source field at the top of the Import Programs
pop-up, select the media that the Program is stored on.
To Next Page
Loading...
