Getting Started
1-40 Versana Essential – User Guide
5759238-100 English
Rev. 2
Probes
Connecting the Probe
Only use approved probes.
Inspect the probe before and after each use for damage or
degradation to the housing, strain relief, lens, seal, cable and
connector. DO NOT use a transducer which appears damaged
until functional and safe performance is verified. A thorough
inspection should be conducted during the cleaning process.
Remove any dust or foam rests from the probe pins.
Fault conditions can result in electric shock hazard. Do not
touch the surface of probe connectors which are exposed
when the probe is removed. DO NOT touch the patient when
connecting or disconnecting a probe.
To Next Page
Loading...
