Scan Assistant
Versana Essential – User Guide 2-43
5759238-100 English Rev. 2
Using Scan Assistant (continued)
1. Follow the steps indicated in the Program: image/measure
the appropriate anatomy.
2. Perform the indicated trigger to move to the next step in the
Program.
NOTE: The footswitch can be used with Scan Assistant. You can
map Pause/Resume, Previous Step, and Next Step to the
footswitch.
3. To pause or unpause Scan Assistant, press the pause
button on the display.
4. To stop or restart a Program, press the Stop icon at the
bottom of the Scan Assistant Program. A dialog pops up.
This dialog lets you restart the current Program, start
another Program, or stop Scan Assistant.
5. To skip a step or move to a certain step, press the up/down
arrows on the keyboard or select the step you want to move
to using the Trackball and Set keys.
To Next Page
Loading...
