Performing an Exam
2-46 Versana Essential – User Guide
5759238-100 English
Rev. 2
Overview (continued)
There are five sections in My Trainer. The five sections are
displayed on the left side of the My Trainer interface.
Figure 2-26. Sections Display
1. Getting Started: Circuit breaker, Probe Connection.
2. System Setting: Facility name set up, Date time set up,
Enable options check, Language setting, User conf, User
preset.
3. Peripheral Connection: Back panel ports, Network
Connectivity, Connect to a printer, DICOM setting, Back-up/
restore the patient information, software version.
4. Maintenance: Trackball, Contact GE service, Connect to
Insite, Log export, Air Filter Replacement.
5. Quick Card: Control Panel Overview, Entering Patient Data,
Selecting a Probe/Application, Measurements, Annotating
an Image, Adjust Color ROI, Pulsed Wave Doppler, Split
Screen, End Exam, About GE Healthcare.
To Next Page
Loading...
