Getting Started
1-28 Versana Essential – User Guide
5759238-100 English
Rev. 2
Moving the System
1. Always use the handle to move the system.
2. Take extra care when moving the system long distances and
on inclines. Ask for help if necessary.
Avoid ramps that are steeper than ten degrees to avoid
tipping over the
system. Utilize additional care and
personnel when moving on a steep incline (>5 degrees) or
loading the system into a vehicle for transport.
NOTE: Wheel chair ramps are usually less than five degrees.
3. Use the foot brake (pedal), located on the bottom of the
system in the front, when necessary.
4. Do not let the system strike walls or door frames.
5. Use extra care when crossing door or elevator thresholds.
6. Once the destination is reached, lock the wheels.
Moving the system, no incline Moving the system on incline
DO NOT attempt to move the console using any cables or
fixtures, such as the probe connectors.
The system weighs less than 40 kg (88 lbs.), without any
probes or peripherals. To avoid possible injury and equipment
damage:
• Be sure the pathway is clear.
• Limit movement to a slow careful walk.
• Use two or more persons to move the system on inclines or
long distances.
To Next Page
Loading...
