Moving the system
Versana Essential – User Guide 1-31
5759238-100 English Rev. 2
Load the system onto a vehicle
1. Only use vehicles that are designed for transport of Versana
Essential system.
2. Load and unload the system to a vehicle parked on a level
surface.
3. Ensure that the transporting vehicles can handle the weight
of the system plus the passengers.
4. Ensure that the load capacity of the lift is capable of
handling the weight of the system.
5. Ensure that the lift is in good working order.
6. Secure the system while it is on the lift so that it cannot roll.
Use either wood chocks, restraining straps, or other similar
types of constraints. Do not attempt to hold it in place by
hand.
7. Employ two or three persons to load and unload safely from
a vehicle.
8. Load the unit aboard the vehicle carefully and over its center
of gravity. Keep the unit still and upright.
NOTE: Do not lay the unit down on its side.
9. Ensure that the system is firmly secured inside the vehicle.
NOTE: DO NOT restrain the Versana Essential at the monitor or the
monitor neck using a belt.
10. Prevent vibration damage by driving cautiously. Avoid
unpaved roads, excessive speeds, and erratic stops or
starts.
To Next Page
Loading...
